Home | About Us | Contact Us | Site Map | Corp Site

 

Capabilities

» Blown & Cast Film/Sheeting
» Laminations
» Converting
» Materials
» Plant Tour Video

Applications

» Industrial Packaging
» Construction Films
» Geo Liners & Covers
» AG Covers & Liners
» Energy
» Building Systems
» House Wrap

Products

» Product Data Sheets
» Accessories
» MSDS Sheets
» Specwriter & Design Specs
» Installation Instructions
» Literature
» Full Products List
» Limited Warranty
» Custom Product Request

RESOURCES

» Calculator Tools
» Distributor Finder
» Testimonials
» FAQ's
» Team Updates
» Learning Center
» AIA/CES Education

ISO 9001:2008 Certified Management System
AIA Continuing Education
   

accessories

Properties | Guidelines | printer friendly
From tie-down fasteners to field seaming tape, Raven Industries has the accessories you need to maximize your film's versatility and minimize installation time on the job.
Vapor Bond Tape (TVB4)
This white single-sided tape combines a heavy duty, weather-resistant polyethylene backing with an aggressive rubber adhesive. Vapor Bond Tape offers excellent seaming capabilities for our materials with an "Easy Tear" feature to reduce installation time. Typical applications include vapor retarders, covers and liners. Available in a 4" x 210' roll.
VaporBoot System (VBOOT)
The VaporBoot System is designed to assist in securing pipe and other penetrations that run vertically through the vapor retarder material. The VaporBoot System offers a quick solution and is delivered to the jobsite in a complete package including 25 VaporBoots and application tape to complete the installation. VaporBoots are produced from high performance Vapor Block material and are 18" x 18" with a precut center marker.
Vapor Bond Plus Tape (TVBP4)
Vapor Bond Plus is a single-sided aluminum foil tape with a release liner for ease of installation. The aluminum foil has very high impermeability to methane and other gases. Acrylic adhesive provides outstanding adhesion to polyethylene over a wide temperature range. Typical uses include joining and sealing gas/moisture barriers.
Available in a 4" x 150' roll.
Dura-Skrim® Reinforced Sandbags
Dura-Skrim reinforced sandbags are used to secure large covers and liners to prevent wind damage. Made from Dura-Skrim 8 & 12 mil reinforced polyethylene, they are designed for a minimum life of 2 years in exposed applications. These 15" wide x 24" long bags will hold 35 lbs. Sandbags are available in other Raven reinforced materials with minimum order requirements. 11.8" Cable Ties are available.
Canvex® Seal Tape (TS4WT)
Canvex Seal Tape is a single-sided white woven tape that contains an acrylic adhesive with a release liner. It has excellent adhesion to polyethylene and the acrylic adhesive provides much longer life than many competitive tapes. It is recommended for taping the seams on in-wall vapor retarders and crawl spaces.
Available in a 4" x 100' roll.
Dura-Clip (CLIP11)
These full size clips are 11" long and fit most commercial scaffolding. Dura-Clips will securely fasten your poly sheeting to scaffolding, reducing wind whip and increasing the life of your enclosure. Clips are normally placed about every 3' onto the enclosure.
R25B Tape (R25B)
R25B Tape is a single sided aggressive synthetic elastomeric adhesive that bonds instantly to properly prepared polyethylene and polypropylene. The black polymer backing and adhesive is specially formulated to provide years of performance even in direct sunlight. A poly release liner provides for ease of installation.
Available in a 4" x 100' roll.
Raven Welding Rod
Raven Welding Rod is used for field seaming, repairs and detail work, such as installing pipe boots. Packaged in 10 lb spools, it is available in 4mm and 5mm sizes to fit most brands of extrusion guns. Raven Welding Rod is made from a thermally UV stabilized LLDPE resin and is available in both black and white to correspond with the color of geomembranes being utilized.
Butyl Seal Tape (TP2BR)
Butyl seal is a double-sided aggressive reinforced black butyl rubber tape used to join panels of polyethylene and polypropylene together by overlapping the edges and applying Butyl Seal in between. It is also used to adhere to concrete walls and footings when properly prepared. Butyl Seal is non-hardening and flexible.
Available in a 2" x 50' roll.
Tie-Down Buttons (BUTI) &
Tarp Grabbers (BUTEZ)

Tie-Down Buttons & Tarp Grabbers help keep plastic sheeting securely in place. Tie-Down Buttons are designed to eliminate traditional grommets in plastic sheeting up to 10 mil thick and are reusable plastic fittings that are easy to install in any position. Tarp Grabbers are up to 4 times stronger than a brass grommet and are typically used in heavier plastic sheeting from 10 mil to 30 mil thick. Great for equipment covers, large storage covers and truck tarps.
Tape Accessory PropertiesTop
 Canvex Seal Tape
(TS4WT)
Vapor Bond Tape
(TVB4)
Vapor Bond Plus Tape
(TVBP4)
R25B Tape
(R25B)
Butyl Seal Tape
(TP2BR)
BackingWoven
Co-Polymer
7.5 mil
Polyethylene
1.5 mil
Aluminum
8 mil
Polyethylene
Coated Release Paper
Adhesive1.75 mil Pressure-Sensitive Acrylic Adhesive1.5 mil Rubber Based Pressure-Sensitive2 mil Pressure-Sensitive Acrylic Adhesive17 mil +/- 2 mil Synthetic Elastomeric1 mm Black Butyl Rubber
ColorWhiteWhiteSilverBlackBlack
TypeSingle SidedSingle SidedSingle SidedSingle SidedDouble Sided
Size4" x 100'4" x 210'4" x 150'4" x 100'2" x 50'
Adhesion Values45 oz./ inch (to steel)30 oz./ inch (to steel)64 oz./ inch (to steel)20# / inch width107.5 oz./ inch (to steel)
Service Temp.-40° F to +200° F-40° F to +180° F-40° F to +250° F20° F to +180° F30° F to +100° F
Minimum
Application Temp.
10° F50° F10° F35° F35° F
Ideal Storage
Temp./Humidity
70° F w/ 40-50% Humidity70° F w/ 40-50% Humidity70° F w/ 40-50% Humidity70° F w/ 40-50% Humidity70° F w/ 40-50% Humidity

 

General Seaming / Repair Guidelines (Seaming recommendations vary per application)Top
Film
(TVB4) Vapor Bond White Tape
(TVBP4) Vapor Bond Plus Tape
(TS4WT) Canvex Seal Tape
(TP2BR) Butyl Seal Tape
(R25B) R25B Tape
Sew & Tape
Iron Weld
Hot Wedge Weld
Hot Air Weld
Extrusion Weld
Rufco 300 White      
Rufco N450WB      
Dura-Skrim 2 & 2FR     
Dura-Skrim 6CC, 6WW, 6BB & 6WB   
Dura-Skrim 10HUV & 10FR   
Dura-Skrim 8WB, 8BBR & 8BV   
Dura-Skrim 12WB, 12BBR & 12BV   
Dura-Skrim R20BDV    
Dura-Skrim J30B, J36B & J45B       
Dura-Skrim J6WBA & J6WHDA   
Rufco 610B & 1010B   
Rufco 2010B, 2000B & PP20       
Rufco 3010B, 3000B       
Rufco 4000B & PP40       
Canvex CIC     
Canvex C95WB & CB12WB     
Vapor Block 6, 10 & 15   
Vapor Block Plus 6 & 20     
*These are guidelines only and may not be suitable for all applications. Contact Raven Industries for specific application(s).

Note: To the best of our knowledge, unless otherwise stated, these are typical property values and are intended as guides only, not as specification limits. NO WARRANTIES ARE MADE AS TO THE FITNESS FOR A SPECIFIC USE OR MERCHANTABILITY OF PRODUCTS REFERRED TO, no guarantee of satisfactory results from reliance upon contained information or recommendations and disclaims all liability for resulting loss or damage.

 

 
© 2011 Raven Industries, Inc. All rights reserved | P.O. Box 5107, Sioux Falls, SD 57117-5107 | (605) 335-0174 | (800) 635-3456 | Fx. (605) 331-0333